GAPOSA XQ Sileo XS 50 Handmatig - Pagina 5

Blader online of download pdf Handmatig voor {categorie_naam} GAPOSA XQ Sileo XS 50. GAPOSA XQ Sileo XS 50 15 pagina's. Tubular motors with encoder electronic limits
Ook voor GAPOSA XQ Sileo XS 50: Handmatig (16 pagina's)

Pagina afdrukken

INSTALLATION

The fixing bracket

frame so that the roller tube

height not less than 1,8m.

[FOR XQ50] Place the motor square pin

the cap at the opposite end of the tube on the fixing plate.

WARNING: Never hit on the head of the motor (D) when you

insert it into the tube.

NOTES

• For the XQ50, with torque up to 15Nm, the minimum tube diameter

is 50x1,5mm; for motors with higher torques, the minimum tube

diameter is 60x1,5mm.

• For the XQ60, the minimum tube diameter is 63x1,5mm.

WARNING:

• The screws used to fix the last slat on the tube may be too long

and reach the tubular part of the motor. Use appropriate screws or

fixing clips.

• Motor moving parts installed under 2,5m from the ground must be

protected.

• A wrong motor installation can damage persons or objects.

must be fixed inside the box or on the awning

9 0 °

is perfectly horizontal and at a

on the bracket

2/2

and