IKEA W11212416C 사용자 지침 - 페이지 12

{카테고리_이름} IKEA W11212416C에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. IKEA W11212416C 48 페이지.

페이지 인쇄

1. Troubleshooting

Filter Removal Instructions

1. Turn the upper filter assembly

¼ turn counterclockwise and

lift out.

2. Separate the upper filter

assembly by gently pulling apart.

3. Clean the filters as shown.

Cleaning Instructions

IMPORTANT: Do not use wire brush, scouring pad, etc., as they

may damage the filters.

Rinse filter under running water until most soils are removed. If

you have hard-to-remove soils or calcium deposits from hard

water, a soft brush may be required.

Cleaning the exterior

Clean the exterior of the dishwasher with a soft, damp cloth and

mild detergent. If your dishwasher has a stainless steel exterior, a

stainless steel cleaner is recommended - Stainless Steel Cleaner

and Polish Part Number 31464.

Cleaning the interior

Clean the interior of the dishwasher with a paste of powdered

dishwasher detergent and water, or use liquid dishwasher

detergent on a damp sponge to clean the cooled-down interior.

A white vinegar rinse may remove white spots and film. Vinegar is

an acid, and using it too often could damage your dishwasher.

Put 2 cups (500 mL) white vinegar in a glass or dishwasher-safe

2 cup capacity measuring cup on the bottom rack (do not pour).

Run the dishwasher through a complete washing cycle using

an air-dry or an energy-saving dry option. Do not use detergent.

Vinegar will mix with the wash water.

Dishwasher Maintenance Procedure

Removal of Hard Water/Filming: Recommended use of a

monthly maintenance product such as affresh

Cleaner Part Number W10282479.

Load your dishwasher (preferably with dishes affected by

■

filming/hard water).

Place tablet in main wash compartment of detergent

■

dispenser.

Select cycle/option best for heavily soiled dishes and start

■

dishwasher.

†affresh

is a registered trademark of Whirlpool, U.S.A. Used with permission.

Filter Reinstallation Instructions

1. Noting the previous

2. Insert the upper filter

3. Slowly rotate the filter

NOTE: The upper filter assembly

arrow does not have to align with

the arrow in the lower filter as long

as the filter is locked.

IMPORTANT: To avoid damage to dishwasher, do not operate

your dishwasher without the filters properly installed. Be sure the

lower filter is securely in place and the upper filter assembly is

locked into place. If the upper filter assembly turns freely, it is not

locked into place.

Dishwasher Care

CLEANING THE DISHWASHER

NOTE: Using a premeasured detergent tablet or pack for regular

daily use is recommended.

To Reduce Risk of Property Damage During Vacation

or Extended Time Without Use

■

If you have a drain air gap,

check and clean it if the

Dishwasher

dishwasher isn't draining

®†

well.

illustrations, place the

lower filter under the

locating tabs in the bottom

of the dishwasher so the

round opening for the

upper filter

assembly lines up with the

round opening in the bottom

of the tub.

assembly into the circular

opening in the lower filter

clockwise until it drops into

place.Continue to rotate

until the filter is locked into

place. If the filter is not fully

seated (still turns freely),

continue to turn the filter

clockwise until it drops and

locks into place.

When you will not be using the dishwasher during the

summer months, turn off the water and power supply to the

dishwasher.

Make sure the water supply lines are protected against

freezing conditions. Ice formations in the supply lines

can increase water pressure and cause damage to your

dishwasher or home. Damage from freezing is not covered by

the warranty.

When storing your dishwasher in the winter, avoid water

damage by having your dishwasher winterized by authorized

service personnel.

Drain air gap

To replace upper filter assembly