Makita 1806B 사용 설명서 - 페이지 5
{카테고리_이름} Makita 1806B에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 1806B 17 페이지. Power planer
Makita 1806B에 대해서도 마찬가지입니다: 부품 분석 (3 페이지), 사용 설명서 (13 페이지), 사용 설명서 (10 페이지), 사용 설명서 (13 페이지), 사용 설명서 (11 페이지)
페이지 인쇄
10. Keep at least 200 mm (8") away from the
tool at all times.
11. Always switch off and wait for the blades
to come to a complete stop before any
adjusting.
12. Never stick your finger into the chip chute.
Chute may jam when cutting damp wood.
Clean out chips with a stick.
13. Do not leave the tool running. Operate the
tool only when hand-held.
14. When leaving the planer, switch off and
set it with the front base up on a wooden
block, so that the blades do not contact
anything.
SAVE THESE INSTRUCTIONS
WARNING:
MISUSE or failure to follow the safety rules stated in this
instruction manual may cause serious personal injury.
SYMBOLS
The followings show the symbols used for tool.
V ....................... volts
A ....................... amperes
Hz ..................... hertz
................ alternating current
15. Always change both blades or covers on
the drum, otherwise the resulting imbal-
ance will cause vibration and shorten tool
life.
16. Wait for complete run-down before putting
the tool aside.
17. Use only Makita blades specified in this
manual.
18. Some material contains chemicals which
may be toxic. Take caution to prevent dust
inhalation and skin contact. Follow mate-
rial supplier safety data.
n
....................no load speed
˚
....................Class II Construction
.../min................revolutions or reciprocation per
minute
USD201-2
5