Makita 1806B Manual de instruções - Página 5

Procurar online ou descarregar pdf Manual de instruções para Ferramenta eléctrica Makita 1806B. Makita 1806B 17 páginas. Power planer
Também para Makita 1806B: Repartição das peças (3 páginas), Manual de instruções (13 páginas), Manual de instruções (10 páginas), Manual de instruções (13 páginas), Manual de instruções (11 páginas)

10. Keep at least 200 mm (8") away from the

tool at all times.

11. Always switch off and wait for the blades

to come to a complete stop before any

adjusting.

12. Never stick your finger into the chip chute.

Chute may jam when cutting damp wood.

Clean out chips with a stick.

13. Do not leave the tool running. Operate the

tool only when hand-held.

14. When leaving the planer, switch off and

set it with the front base up on a wooden

block, so that the blades do not contact

anything.

SAVE THESE INSTRUCTIONS

WARNING:

MISUSE or failure to follow the safety rules stated in this

instruction manual may cause serious personal injury.

SYMBOLS

The followings show the symbols used for tool.

V ....................... volts

A ....................... amperes

Hz ..................... hertz

................ alternating current

15. Always change both blades or covers on

the drum, otherwise the resulting imbal-

ance will cause vibration and shorten tool

life.

16. Wait for complete run-down before putting

the tool aside.

17. Use only Makita blades specified in this

manual.

18. Some material contains chemicals which

may be toxic. Take caution to prevent dust

inhalation and skin contact. Follow mate-

rial supplier safety data.

....................no load speed

....................Class II Construction

.../min................revolutions or reciprocation per

minute

USD201-2