Makita 1911B 사용 설명서 - 페이지 8
{카테고리_이름} Makita 1911B에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 1911B 12 페이지. Power planer
Makita 1911B에 대해서도 마찬가지입니다: 사용 설명서 (16 페이지), 사용 설명서 (13 페이지), 사용 설명서 (18 페이지), 사용 설명서 (12 페이지)
페이지 인쇄
Planing operation
First, rest the tool front base flat upon the
workpiece surface without the blades mak-
ing any contact. Switch on and wait until
the blades attain full speed. Then move the
tool gently forward. Apply pressure on the
front of tool
a t
the start of planing, and a t
the back a t the end of planing. Planing will
be easier if you incline the workpiece in
stationary fashion, so that you can plane
Fig.
9
somewhat downhill. The speed and depth
of cut determine the kind of finish. The power planer keeps cutting
a t a
speed that will
not result in jamming by chips. For rough cutting, the depth of cut can be increased, while
for a good finish you should reduce the depth of cut and advance the tool more slowly.
Chamfering
To make a cut as shown a t the right, align the "V" groove in the
front base with the edge of the workpiece and plane
it as
shown
in the figure (A).
Sharpening planer baldes
Always keep your blades sharp for the best
performance possible.
Use
the sharpening
holder
to
remove nicks and produce a fine
edge.
A Ign the "V" groove w th
the edge of the worcpiece
Fig. 11
I
1
Fig. 12
8