Makita 1911B Kullanım Kılavuzu - Sayfa 8

Elektrikli Alet Makita 1911B için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Makita 1911B 12 sayfaları. Power planer
Ayrıca Makita 1911B için: Kullanım Kılavuzu (16 sayfalar), Kullanım Kılavuzu (13 sayfalar), Kullanım Kılavuzu (18 sayfalar), Kullanım Kılavuzu (12 sayfalar)

Planing operation

First, rest the tool front base flat upon the

workpiece surface without the blades mak-

ing any contact. Switch on and wait until

the blades attain full speed. Then move the

tool gently forward. Apply pressure on the

front of tool

a t

the start of planing, and a t

the back a t the end of planing. Planing will

be easier if you incline the workpiece in

stationary fashion, so that you can plane

Fig.

somewhat downhill. The speed and depth

of cut determine the kind of finish. The power planer keeps cutting

a t a

speed that will

not result in jamming by chips. For rough cutting, the depth of cut can be increased, while

for a good finish you should reduce the depth of cut and advance the tool more slowly.

Chamfering

To make a cut as shown a t the right, align the "V" groove in the

front base with the edge of the workpiece and plane

it as

shown

in the figure (A).

Sharpening planer baldes

Always keep your blades sharp for the best

performance possible.

Use

the sharpening

holder

remove nicks and produce a fine

edge.

A Ign the "V" groove w th

the edge of the worcpiece

Fig. 11

Fig. 12