Makita 3606 사용 설명서 - 페이지 10

{카테고리_이름} Makita 3606에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 3606 17 페이지. Makita 3606 plunge router: specifications
Makita 3606에 대해서도 마찬가지입니다: 부품 분석 (2 페이지)

페이지 인쇄

1. Wing bolt (B)

2. Fine adjusting screw

3. Wing bolt (A)

4. Wing nut (C)

5. Guide roller

1. Bit

2. Guide roller

MAINTENANCE

Install the trimmer guide on the tool base with the wing bolt

003699

(B). Loosen the wing bolt (A) and adjust the distance

between the bit and the trimmer guide by turning the fine

adjusting screw (1.5 mm or 1/16" per turn). At the desired

distance, tighten the wing bolt (A) to secure the trimmer

guide in place. When adjusting the guide roller up or down,

loosen the wing nut (C). After adjusting it, tighten the wing

nut (C) securely.

When cutting, move the tool with the guide roller riding the

003701

side of the workpiece.

CAUTION:

•

Always be sure that the tool is switched off and

unplugged before attempting to perform inspection or

maintenance.

To maintain product SAFETY and RELIABILITY, repairs, car-

bon brush inspection and replacement, any other mainte-

nance or adjustment should be performed by Makita

Authorized or Factory Service Centers, always using Makita

replacement parts.