Garage Smart Multi-Bike Lifter 설치 및 사용자 설명서 - 페이지 9

{카테고리_이름} Garage Smart Multi-Bike Lifter에 대한 설치 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Garage Smart Multi-Bike Lifter 16 페이지.

Install the MyLifter unit

1. Align the holes on the MyLifter bracket with the holes on the Smart Track, leaving

four open holes to the right of the side where the cable comes off the lifter.

2. Insert the included spring pins. Make sure to press the spring pins all the way

through the holes in the MyLifter bracket and the holes on the Smart Track.

3. On the same side of the track where the cable comes off the MyLifter, and on the

side where the DC cable is connected to the MyLifter, hook the carabiner into the

third hole from the lifter.

4. Plug in one end of the DC Power Cable into the Garage Smart Power Adapter.

5. Install the power adapter anywhere on the Smart Track. The universal mount

attached to the bottom of the power adapter lets you easily slide and snap it into

place on the track.

6. Plug the other end of the DC Power Cable into the MyLifter unit.

7. Plug the power adapter into the nearest outlet.