Garage Smart Multi-Bike Lifter Instrukcja instalacji i obsługi - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Systemy podnoszenia Garage Smart Multi-Bike Lifter. Garage Smart Multi-Bike Lifter 16 stron.
Drukuj stronę
Install the MyLifter unit
1. Align the holes on the MyLifter bracket with the holes on the Smart Track, leaving
four open holes to the right of the side where the cable comes off the lifter.
2. Insert the included spring pins. Make sure to press the spring pins all the way
through the holes in the MyLifter bracket and the holes on the Smart Track.
3. On the same side of the track where the cable comes off the MyLifter, and on the
side where the DC cable is connected to the MyLifter, hook the carabiner into the
third hole from the lifter.
4. Plug in one end of the DC Power Cable into the Garage Smart Power Adapter.
5. Install the power adapter anywhere on the Smart Track. The universal mount
attached to the bottom of the power adapter lets you easily slide and snap it into
place on the track.
6. Plug the other end of the DC Power Cable into the MyLifter unit.
7. Plug the power adapter into the nearest outlet.
9