Makita 3703 사용 설명서 - 페이지 4

{카테고리_이름} Makita 3703에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 3703 20 페이지. Trimmer
Makita 3703에 대해서도 마찬가지입니다: 사용 설명서 (12 페이지)

페이지 인쇄
Makita 3703 사용 설명서
ADDITIONAL SAFETY RULES
1.
Wear hearing protection during extended periods of operation.
2.
Handle the bits very carefully.
3.
Check the bit carefully for cracks or damage before operation.
4.
Avoid cutting nails. Inspect for and remove all nails from the workpiece before
5.
Hold the tool firmly.
6.
Keep hands away from rotating parts.
7.
Make sure the
bit
is not contacting the workpiece before the switch is turned
8.
Before using the tool o n an actual workpiece, let it
run
for a while.
9.
Be careful of the
bit
rotating direction and the feed direction.
Replace cracked or damaged
bit
immediately.
operation.
on.
Watch for vibration or wobbling that could indicate improperly installed
bit.
IO.
Do not leave the tool running. Operate the tool only when hand-held.
11. Always switch off and wait for the bit t o come t o a complete stop before
12.
Do not tcuch the bit immediately after operation; it may be extremely hot
13.
Don't smear the tool base carelessly w i t h thinner, gasoline, oil or the like.
removing the tool from workpiece.
and could burn your skin.
They may cause cracks in the tool base.
SAVE THESE INSTRUCTIONS.
4