Makita 3703 사용 설명서 - 페이지 5

{카테고리_이름} Makita 3703에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 3703 20 페이지. Trimmer
Makita 3703에 대해서도 마찬가지입니다: 사용 설명서 (12 페이지)

페이지 인쇄
Makita 3703 사용 설명서
Installing or removing trimmer bit
CAUTION
:
Always be sure that the tool
i s
switched off and unplugged before installing or removing
the bit.
Insert the bit all the way into the collet
cone and tighten the collet nur securely
with the
two
wrenches.
To remove the bit, follow the installation
procedure in reverse.
CAUTION
:
0
Do
not tighten the collet nut without inserting a bit,
or
the collet cone will break.
0
Use only the wrenches provided with the tool.
Adjusting bit protrusion
To adjust the bit protrusion, loosen the nut
and move the tool
base
up or down
as
de-
sired by turning the adjusting screw. After
adjusting, tighten the nut firmly to secure
the tool base.
Switch action
To start the tool, move the switch lever
t o
the
"ON"
position. To stop, move the
switch lever to the "OFF" position.
5