CORNING LSE 사용 설명서 - 페이지 3

{카테고리_이름} CORNING LSE에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CORNING LSE 8 페이지. Low speed orbital shaker

페이지 인쇄

1.0 General Specifications

Electrical Requirements

120V model

230V model

Fuse

Speed

Shaker Orbit

Timer

Maximum Load

Dimensions

Platform Dimensions

Weight

Operating Conditions

Warranty

Platform Size

This device is intended for use in a basic electromagnetic environment (Basic, class B), and it

is in compliance with IEC 61326-1. Supply cord can be exchanged only with cord 3 x 1.0 mm

for USA/Canada 3 x 18 AWG.

The Corning® LSE™ Low Speed Orbital Shaker is designed to be safe when operated under the

following conditions:

Indoor use

Altitude up to 2,000 meters

Pollution Degree 2

2.0 Safety Precautions

Do not use the shaker near water. Ensure that water does not get on the device,

particularly during cleaning.

If the unit is used in a manner not specified in this manual, then the unit may

become unsafe to operate and may void the warranty.

This product must be connected to a grounded power outlet for safe functioning.

Use only the power cord supplied with the product.

The equipment will not restart if the main power source is interrupted.

The equipment will restart in cases of mechanical interruption.

Do not expose the shaker to aggressive vapors (e.g., organic solvents).

Do not insert any objects into the shaker (such as a screwdriver or metal rods).

Never operate the shaker without the platform securely attached.

Hazardous samples should be shaken only in appropriate containment vessels.

120V ± 10%, 50/60Hz, 0.3A

230V ± 10%, 50/60Hz, 0.15A

2 x 1A

3 to 60 rpm

0.75 in. (1.9 cm)

20 to 120 minutes in 10 minute step, HOLD function

5 kg

11.6 x 13.4 x 6.3 in. (29.5 x 34 x 16 cm)

11.6 x 11.6 in. (29.5 x 29.5 cm) useable area

14.5 lbs. (6.6 kg)

4°C to 65°C, up to 85% RH, non-condensing

5 years

11.8 x 11.8 in. (30 x 30 cm)

Instruction Manual