Avantco Equipment CFD10 사용자 설명서 - 페이지 5

{카테고리_이름} Avantco Equipment CFD10에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avantco Equipment CFD10 10 페이지. Commercial

Before Using Your Dehydrator

Before drying anything in your dehydrator for the first time, please

follow these simple instructions:

Remove from box.

1 .

Remove rack supports, door, and stainless steel racks (tape will be holding them in).

2 .

Using a small amount of detergent, was the handle and food racks with soapy water. (NOTE: Do

3 .

not use a spray or abrasive polishing agent.)

Wipe down interior with a damp cloth. While washing this unit, do not touch the electrical heating

4 .

element and fan. Do not soak the inside of the dehydrator with water.

After washing and drying, re-assemble the unit.

5 .

Plug in and turn it to its highest temperature setting for 5 minutes.

6 .

Turn off the heating elements and open the dehydrator front panel in order to remove any smoky

7 .

residue from inside the dehydrator. The heating elements are well lubricated and this initial use

will help burn off the extra grease. A light amount of smoke is normal during this process.

To start your dehydrator, turn the power switch on. To set a time, turn on the timer, and

this will cause the fan to start working. Turn on the thermostat dial to set a desired

temperature, and the heating element will begin heating.

CAUTION: During the dehydrating process, make sure that no metal

accessory comes in contact with the electrical fan and heating elements .

CAUTION: Foods dehydrated in this unit will be hot . Wear protective hand

coverings when reaching into dehydrator to retrieve food .

www.AvantcoEquipment.com

User Manual