Avantco Equipment CFD10 Podręcznik użytkownika - Strona 5
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Urządzenia kuchenne Avantco Equipment CFD10. Avantco Equipment CFD10 10 stron. Commercial
Drukuj stronę
Before Using Your Dehydrator
Before drying anything in your dehydrator for the first time, please
follow these simple instructions:
Remove from box.
1 .
Remove rack supports, door, and stainless steel racks (tape will be holding them in).
2 .
Using a small amount of detergent, was the handle and food racks with soapy water. (NOTE: Do
3 .
not use a spray or abrasive polishing agent.)
Wipe down interior with a damp cloth. While washing this unit, do not touch the electrical heating
4 .
element and fan. Do not soak the inside of the dehydrator with water.
After washing and drying, re-assemble the unit.
5 .
Plug in and turn it to its highest temperature setting for 5 minutes.
6 .
Turn off the heating elements and open the dehydrator front panel in order to remove any smoky
7 .
residue from inside the dehydrator. The heating elements are well lubricated and this initial use
will help burn off the extra grease. A light amount of smoke is normal during this process.
Using Your Dehydrator
To start your dehydrator, turn the power switch on. To set a time, turn on the timer, and
this will cause the fan to start working. Turn on the thermostat dial to set a desired
temperature, and the heating element will begin heating.
CAUTION: During the dehydrating process, make sure that no metal
accessory comes in contact with the electrical fan and heating elements .
CAUTION: Foods dehydrated in this unit will be hot . Wear protective hand
coverings when reaching into dehydrator to retrieve food .
www.AvantcoEquipment.com
User Manual
5