Makita 3707F 사용 설명서 - 페이지 5

{카테고리_이름} Makita 3707F에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 3707F 16 페이지. Trimmer
Makita 3707F에 대해서도 마찬가지입니다: 사양 (2 페이지), 사용 설명서 (17 페이지), 사용 설명서 (10 페이지), 사용 설명서 (13 페이지)

페이지 인쇄

FUNCTIONAL

DESCRIPTION

1. Base

2. Lever

3. Scale

4. Adjusting roller

1. Switch lever

CAUTION:

•

Always be sure that the tool is switched off and unplugged before

adjusting or checking function on the tool.

Adjusting bit protrusion

001698

To adjust the bit protrusion, loosen the lever and move the tool base up or

down as desired by turning the adjusting roller. After adjusting, tighten the

lever firmly to secure the tool base.

Switch action

001982

CAUTION:

•

Before plugging in the tool, always be sure that the tool is switched off.

To start the tool, move the switch lever to the I (ON) position. To stop the tool,

move the switch lever to the O (OFF) position.

Electronic function

For model 3707FC only

The tool equipped with electronic function are easy to operate because of the

following features.

Constant speed control

Electronic speed control for obtaining constant speed. Possible to get fine fin-

ish, because the rotating speed is kept constant even under load condition.

Soft start

Soft-start feature minimizes start-up shock, and makes the tool start smoothly.

Lighting up the lamps

For model 3707F/3707FC only

CAUTION:

•

Do not look in the light or see the source of light directly.

To turn on the lamp, start the tool. Then, the lamp lights up the top of the bit.

To turn it off, stop the tool.

NOTE:

•

Use a dry cloth to wipe the dirt off the lens of lamp. Be careful not to

scratch the lens of lamp, or it may lower the illumination.