CORNING LSE 6710 사용 설명서 - 페이지 3
{카테고리_이름} CORNING LSE 6710에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CORNING LSE 6710 12 페이지. Digital vortexer
CORNING LSE 6710에 대해서도 마찬가지입니다: 사용 설명서 (9 페이지)
1.0 Overview
The Corning® LSE™ Digital Vortexer is intended for vortexing microliter plates, tubes, bottles,
flasks, dishes, and other laboratory vessels. The vortexer is driven by asynchronous motors,
which enable silent operation and constant shaking speed, independent of the load or power
supply fluctuations.
Each vorexer consists of two main components:
Motor with eccentric mechanism
Control electronics
The motor drives the vortexer's eccentric mechanics and generates the shaking effect. The
electronics control the motor RPM, Time, and keyboard functions.
2.0 Safety Precautions
Always plug the unit into a properly grounded and fused outlet.
Do not use the device near water sources. Take care so that water will not fall on the
device, especially during cleaning procedures.
Do not use the device in a caustic or explosive atmosphere.
There are no user serviceable parts in the unit. Opening the unit may void the warranty.
In case of a malfunction or liquid being spilled into the unit, unplug the device from its
power outlet and contact Corning Customer Service.
NOTE: In the case that the device does not function properly even if you have
exactly followed the instructions described in this manual, contact Corning
Customer Service. If the equipment is used in a manner not specified by this
manual, the equipment may become unsafe to operate, could harm the user or the
device, and may void the warranty.
Do not shake inflammable or explosive samples or use the unit in an inflammable or
explosive environment.
3.0 Technical Specifications
The vortexer housing is made from a high-grade, cold rolled steel plate and painted with a
highly resistant polyurethane lacquer.
Electrical
120V
230V
Motor Power
Fuse
120V
230V
Ambient Operation Range
120V ± 10%, 50/60Hz
230V ± 10%, 50/60Hz
15W
2 x 1AT, 120V
2 x 0.25AT, 230V
5°C to 40°C, up to 85% RH, non-condensing
Instruction Manual
1