CORNING LSE 6710 Manual de instruções - Página 3

Procurar online ou descarregar pdf Manual de instruções para Equipamento de laboratório CORNING LSE 6710. CORNING LSE 6710 12 páginas. Digital vortexer
Também para CORNING LSE 6710: Manual de instruções (9 páginas)

1.0 Overview

The Corning® LSE™ Digital Vortexer is intended for vortexing microliter plates, tubes, bottles,
flasks, dishes, and other laboratory vessels. The vortexer is driven by asynchronous motors,
which enable silent operation and constant shaking speed, independent of the load or power
supply fluctuations.
Each vorexer consists of two main components:
Motor with eccentric mechanism

Control electronics

The motor drives the vortexer's eccentric mechanics and generates the shaking effect. The
electronics control the motor RPM, Time, and keyboard functions.

2.0 Safety Precautions

Always plug the unit into a properly grounded and fused outlet.

Do not use the device near water sources. Take care so that water will not fall on the

device, especially during cleaning procedures.
Do not use the device in a caustic or explosive atmosphere.

There are no user serviceable parts in the unit. Opening the unit may void the warranty.

In case of a malfunction or liquid being spilled into the unit, unplug the device from its
power outlet and contact Corning Customer Service.
NOTE: In the case that the device does not function properly even if you have
exactly followed the instructions described in this manual, contact Corning
Customer Service. If the equipment is used in a manner not specified by this
manual, the equipment may become unsafe to operate, could harm the user or the
device, and may void the warranty.
Do not shake inflammable or explosive samples or use the unit in an inflammable or
explosive environment.

3.0 Technical Specifications

The vortexer housing is made from a high-grade, cold rolled steel plate and painted with a
highly resistant polyurethane lacquer.
Electrical
120V
230V
Motor Power
Fuse
120V
230V
Ambient Operation Range
120V ± 10%, 50/60Hz
230V ± 10%, 50/60Hz
15W
2 x 1AT, 120V
2 x 0.25AT, 230V
5°C to 40°C, up to 85% RH, non-condensing
Instruction Manual
1