Makita 3901 사용 설명서 - 페이지 4

{카테고리_이름} Makita 3901에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 3901 12 페이지. 12-1/4" planer, blade sharpener, plate joiner, chain mortiser, blower, heat gun
Makita 3901에 대해서도 마찬가지입니다: 브로셔 (1 페이지), 사용 설명서 (16 페이지), 사용 설명서 (17 페이지)

페이지 인쇄

15. Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

16. Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing, and gloves

away from moving parts. Loose clothes,

jewellery or long hair can be caught in moving

parts.

17. If devices are provided for the connection of

dust

extraction

ensure these are connected and properly used.

Use of dust collection can reduce dust-related

hazards.

Power tool use and care

18. Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at the

rate for which it was designed.

19. Do not use the power tool if the switch does

not turn it on and off. Any power tool that cannot

be controlled with the switch is dangerous and

must be repaired.

20. Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing

accessories, or storing power tools. Such

preventive safety measures reduce the risk of

starting the power tool accidentally.

21. Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions to

operate the power tool. Power tools are

dangerous in the hands of untrained users.

22. Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may affect the

power tool's operation. If damaged, have the

power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

23. Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

24. Use the power tool, accessories and tool bits

etc. in accordance with these instructions,

taking into account the working conditions

and the work to be performed. Use of the power

tool for operations different from those intended

could result in a hazardous situation.

Service

25. Have your power tool serviced by a qualified

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

26. Follow

instruction

changing accessories.

and

collection

facilities,

for

lubricating

27. Keep handles dry, clean and free from oil and

grease.

PLATE JOINER SAFETY

WARNINGS

Blades must be rated for at least the speed

recommended on the tool. Blades running over

rated speed can fly apart and cause injury.

Always use the guard. The guard protects the

operator from broken blade fragments and

unintentional contact with the blade.

Hold power tools by insulated gripping

surfaces when performing an operation where

the cutting tool may contact hidden wiring or

its own cord. Contact with a "live" wire will make

exposed metal parts of the tool "live" and could

give the operator an electric shock.

Use only the blades specified for this tool.

Never operate the tool with the blade locked in

exposed position or without the blade cover

secured properly in place.

Make sure that the blade slides smoothly

before operation.

Check the blades carefully for cracks or

damage before operation. Replace cracked or

damaged blades immediately.

Make sure that the flange fits in the arbor hole

when installing the blade.

Inspect for and remove all nails or foreign

matter from the workpieces before operation.

10. Always place the workpieces on a stable

workbench.

11.

Secure the workpieces firmly with clamp or

vise.

12. NEVER wear gloves during operation.

13. Hold the tool firmly with both hands.

14. Keep your hands and body away from the

cutting area.

15. Run the tool for a while without the blade

pointing toward anybody. Watch for vibration

wobbling

installation or a poorly balanced blade.

16. Never reach your hands underneath the

workpieces while the blade is rotating.

17. Do not leave the tool running unattended.

18. Always be sure that the tool is switched off

and

adjustments or replacing the blade.

19. Some material contains chemicals which may

be toxic. Take caution to prevent dust

inhalation and skin contact. Follow material

supplier safety data.

and

20. Do not use blunt or damaged blades.

that

could

unplugged

before

GEB020-2

indicate

poor

making

any