Garage Tek GT1005AE 설치 지침 매뉴얼 - 페이지 4
{카테고리_이름} Garage Tek GT1005AE에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garage Tek GT1005AE 7 페이지. Wall cabinet, resin
페이지 인쇄WALL CABINET, RESIN
ASSEMBLY INSTRUCTIONS
STEP #5
A. CUTOUT TEMPLATE ON PAGE 7 OF THESE INSTRUCTIONS, PLACE AS SHOWN ABOVE AND MARK THE HOLE
LOCATIONS. THE HOLE ON THE INSIDE ALREADY MATCHES A PRE-EXISTING BOSS. DRILL THROUGH THE
PANELS WITH A 1/8 DIA DRILL BIT.
B. LOCATE THE HANDLES AS SHOWN WITH THE PADLOCK HOLES IN-LINE AND SCREW THE HANDLES IN
PLACE.
STEP #6:
A. SNAP THE DOOR BIN (J), QTY 1, INTO THE TRACK LOCATION ON THE INSIDE OF THE DOORS WHERE
DESIRED. NOTE: IT CAN NOT BE PLACED IN FRONT OF A SHELF.
B. SNAP THE SHELF CLIPS (I), QTY 8, INTO THE VERTICAL TRACKS AROUND THE INSIDE OF THE CABINET BODY
ON THE PANELS. THERE ARE QTY 4, CLIPS PER SHELF AND THE QTY 2, CLIPS WITH THE ARCHED HOOD ARE TO
BE LOCATED IN THE BACK OF THE CABINET AND THE QTY 2, FLAT TOPPED CLIPS ARE ON THE SIDES.
C. PLACE THE SHELF(S) (C), QTY 2, ON THE SHELF CLIPS. THE FRONT SHELF LIP CAN BE LOCATED UP OR
DOWN. IF YOU DO NOT WANT ITEMS POSSIBLY ROLLING OFF THE SHELF, PLACE UP. APPLY THE GT LOGO (K),
QTY 1, ON THE LOCATION SHOWN.
PG 4
QUESTIONS ???? CALL 1-866 664 2724
REV 1, 10/11