Garage Tek GT1005AE Instrukcja instalacji - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Wyposażenie wnętrz Garage Tek GT1005AE. Garage Tek GT1005AE 7 stron. Wall cabinet, resin

WALL CABINET, RESIN

ASSEMBLY INSTRUCTIONS

STEP #5

A. CUTOUT TEMPLATE ON PAGE 7 OF THESE INSTRUCTIONS, PLACE AS SHOWN ABOVE AND MARK THE HOLE

LOCATIONS. THE HOLE ON THE INSIDE ALREADY MATCHES A PRE-EXISTING BOSS. DRILL THROUGH THE

PANELS WITH A 1/8 DIA DRILL BIT.

B. LOCATE THE HANDLES AS SHOWN WITH THE PADLOCK HOLES IN-LINE AND SCREW THE HANDLES IN

PLACE.

STEP #6:

A. SNAP THE DOOR BIN (J), QTY 1, INTO THE TRACK LOCATION ON THE INSIDE OF THE DOORS WHERE

DESIRED. NOTE: IT CAN NOT BE PLACED IN FRONT OF A SHELF.

B. SNAP THE SHELF CLIPS (I), QTY 8, INTO THE VERTICAL TRACKS AROUND THE INSIDE OF THE CABINET BODY

ON THE PANELS. THERE ARE QTY 4, CLIPS PER SHELF AND THE QTY 2, CLIPS WITH THE ARCHED HOOD ARE TO

BE LOCATED IN THE BACK OF THE CABINET AND THE QTY 2, FLAT TOPPED CLIPS ARE ON THE SIDES.

C. PLACE THE SHELF(S) (C), QTY 2, ON THE SHELF CLIPS. THE FRONT SHELF LIP CAN BE LOCATED UP OR

DOWN. IF YOU DO NOT WANT ITEMS POSSIBLY ROLLING OFF THE SHELF, PLACE UP. APPLY THE GT LOGO (K),

QTY 1, ON THE LOCATION SHOWN.

PG 4

QUESTIONS ???? CALL 1-866 664 2724

REV 1, 10/11