Makita 4304 사용 설명서 - 페이지 10

{카테고리_이름} Makita 4304에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 4304 20 페이지. Variable speed
Makita 4304에 대해서도 마찬가지입니다: 사용자 설명서 (8 페이지)

CAUTION :

Always hold the tool with the base flush with the workpiece. Failure to do so may cause

*Advance the tool very slowly when cutting curves or scrolling. Forcing the tool may

slanted cutting surface and blade breakage.

cause

slanted cutting surface and blade breakage.

Bevel cutting

CAUTION

Always unplug the tool before making any adjustments.

With the base tilted, you can make bevel

cuts

a t

any angle between 0" and 45' (left

or right). Loosen the bolt on the bottom of

the tool. Move the base so that the bolt is

positioned in the center of the cross-shaped

slot in the base.

Tilt the base until the desired bevel angle

i s

obtained. The edge of the motor housing

indicates the bevel angle by graduations.

Then tighten the bolt to secure the base.

Crossshaped

slot

Edge of motor housing

/ /

Base

Graduations

Flush cutting

Loosen the bolt on the bottom of the tool and slide the base all the way back. Then

tighten the bolt to secure the base.

For 4304