Makita 4322 사용 설명서 - 페이지 8

{카테고리_이름} Makita 4322에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 4322 17 페이지.
Makita 4322에 대해서도 마찬가지입니다: 사용 설명서 (19 페이지)

1. Hex wrench

2. Bolt

3. Base

1 2

1. Graduation

2. Edge

Bevel cutting

002746

CAUTION:

•

Always be sure that the tool is switched off and unplugged before tilting

the base.

•

Raise the dust cover all the way before making bevel cuts.

With the base tilted, you can make bevel cuts at any angle between 0° and 45°

(left or right).

Loosen the bolt on the back of the base with the hex wrench. Move the base

002748

so that the bolt is positioned in the center of the cross-shaped slot in the base.

Tilt the base until the desired bevel angle is obtained. The edge of the motor

002747

housing indicates the bevel angle by graduations. Then tighten the bolt to

secure the base.

Front flush cuts

002756

Loosen the bolt on the back of the base with the hex wrench and slide the

base all the way back. Then tighten the bolt to secure the base.