Makita 4322 사용 설명서 - 페이지 10

{카테고리_이름} Makita 4322에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 4322 17 페이지.
Makita 4322에 대해서도 마찬가지입니다: 사용 설명서 (19 페이지)

Steel base type

1. Rip fence (Guide rule)

Aluminum base type

1. Rip fence(Guide rule)

Steel base type

1. Hex wrench

2. Bolt

3. Rip fence (Guide rule)

4. Guide facing

Aluminum base type

1. Bolt

2. Fence guide

3. Hex wrench

4. Rip fence(Guide rule)

Rip fence (optional accessory)

CAUTION:

•

Always be sure that the tool is switched off and unplugged before

installing or removing accessories.

Straight cuts

002773

When repeatedly cutting widths of 160 mm or less, use of the rip fence

will assure fast, clean, straight cuts.

005852

To install, insert the rip fence into the rectangular hole on the side of the

002774

base with the fence guide facing down. Slide the rip fence to the desired

cutting width position, then tighten the bolt to secure it.

005853