Makita 4322 사용 설명서 - 페이지 11

{카테고리_이름} Makita 4322에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 4322 17 페이지.
Makita 4322에 대해서도 마찬가지입니다: 사용 설명서 (19 페이지)

Steel base type

1. Threaded knob

2. Guide facing

3. Rip fence (Guide rule)

4. Pin

Aluminum base type

1. Threaded knob

2. Circular guide pin

3. Rip fence(Guide rule)

4. Fence guide

Steel base type

1. Rip fence (Guide rule)

Aluminum base type

1. Rip fence(Guide rule)

Circular cuts

002779

When cutting circles or arcs of 170 mm or less in radius, install the rip

fence as follows.

Insert the rip fence into the rectangular hole on the side of the base with

the fence guide facing up. Insert the circular guide pin through either of

the two holes on the fence guide. Screw the threaded knob onto the pin

to secure the pin.

Now slide the rip fence to the desired cutting radius, and tighten the bolt

to secure it in place. Then move the base all the way forward.

NOTE:

•

Always use blades No. B-17, B-18, B-26 or B-27 when cutting circles or

arcs.

005854

002780

005855