Makita 4322 Kullanım Kılavuzu - Sayfa 11
Elektrikli Alet Makita 4322 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Makita 4322 17 sayfaları.
Ayrıca Makita 4322 için: Kullanım Kılavuzu (19 sayfalar)
Sayfayı Yazdır
Steel base type
1
2
3
4
1. Threaded knob
2. Guide facing
3. Rip fence (Guide rule)
4. Pin
Aluminum base type
4
1. Threaded knob
2. Circular guide pin
3. Rip fence(Guide rule)
4. Fence guide
Steel base type
1
1. Rip fence (Guide rule)
Aluminum base type
1
1. Rip fence(Guide rule)
2.
Circular cuts
002779
When cutting circles or arcs of 170 mm or less in radius, install the rip
fence as follows.
Insert the rip fence into the rectangular hole on the side of the base with
the fence guide facing up. Insert the circular guide pin through either of
the two holes on the fence guide. Screw the threaded knob onto the pin
to secure the pin.
Now slide the rip fence to the desired cutting radius, and tighten the bolt
to secure it in place. Then move the base all the way forward.
NOTE:
•
Always use blades No. B-17, B-18, B-26 or B-27 when cutting circles or
arcs.
005854
1
2
3
002780
005855
11