Bernina Medium Clamp Embroidery Hoop 빠른 시작 매뉴얼

{카테고리_이름} Bernina Medium Clamp Embroidery Hoop에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bernina Medium Clamp Embroidery Hoop 2 페이지.

BERNINA International AG | CH-8266 Steckborn Switzerland | www.bernina.com | © Copyright by BERNINA International AG

1066905.00A.04

2022-03 EN

Medium Clamp Embroidery Hoop

Information

Scope of delivery

• 1× Embroidery Hoop

• 1× Embroidery Template

• 12× Clamp

Purpose

• To quilt in the hoop.

For your safety

Before using this accessory, please read this instruction manual as well as the

instruction manual of your machine carefully.

Overview

A Clamps

B Hoop

C Embroidery Template

D Push button

Application

Hooping the fabric

> Mark the center of the quilt block on the quilt sandwich with a water-

soluble pen.

> Place the quilt sandwich on the hoop.

> Place the Embroidery Template on the quilt sandwich. Make sure that the

quilt sandwich does not get distorted.

> Align the marked center with the center of the Embroidery Template.

(Fig. 2)

> Press the Embroidery Template firmly onto the quilt sandwich.

> Position the first clamp centrally on one side of the hoop. Place second

clamp centrally on the opposite side. Position the third and fourth clamp

centrally on the other two sides. Place the remaining clamps on all sides to

the right and left of the center clamps. (Fig. 3)

> Remove the Embroidery Template from the Embroidery Hoop.

• Embroidery field 8-Series (#26): 8,5 × 8,5" (215 × 215 mm)

• Embroidery field 7-Series (#26): 8,25 × 8,5" (210 × 215 mm) -

limited embroidery field on the left side

• Embroidery field 8- and 7-Series (#43/44C): 8 × 8" (200 × 200 mm)

Embroidery Hoop Connector