GarageAce R3 설치 지침 매뉴얼 - 페이지 13

{카테고리_이름} GarageAce R3에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. GarageAce R3 20 페이지. Roller garage door opener

Press 'DOWN' button to decrease the force. The maximum force is 9, the minimum force is 1. The default is 3.

Press 'SET' button

4.4.2 Recommended force：5-15 kg resistance is recommended. Lightly lift the door while door closing, the

door can be automatic reverse under approximate 5~15 kg resistance.

The force from 1 to 9

Min force is 1, max force is 9

4.5 Connecting the photocells (OPTIONAL)*

*The photo beam is an optional unit available

as a special order.

4.5.1 The GND、PE、+24V connections of the terminal block

(green) at the bottom of the door operator are for photocells,

Please refer the Fig.10. Please choose switch value style(NC)

photocell.

Notice: Close the photo beam function when not utilizing

the photo beam sensor.

4.5.2 Activating the photocell function:

Press 'DOWN' button and hold on until the LED displays'11',

press 'UP' button the LED displays 'H', photocell function is

available, press 'SET' to confirm.

Press 'DOWN' button

Display from '1' to '3'

Press 'SET' to confirm

Press 'UP' button

Display '11'

Press 'UP' or 'DOWN' button to adjust the force

Display 'H'

Press 'SET' to confirm