CORNING EDC-02P-NH 매뉴얼 - 페이지 3
{카테고리_이름} CORNING EDC-02P-NH에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CORNING EDC-02P-NH 12 페이지. Environmental distribution center
CORNING EDC-02P-NH에 대해서도 마찬가지입니다: 매뉴얼 (7 페이지)
페이지 인쇄
SRP 003-304 • Issue 9 • July 2004
4.
Tools and Materials
In addition to the usual complement of
installation tools, the following are required for
this installation:
•
Slotted and Philips-head screwdrivers
•
Tape measure
•
Pliers
•
8-mm (
5
/
-inch) open or box wrench
16
•
Utility pole or wall mounting hardware (as
required by your installation)
•
Two cable entry port fittings (ordered
separately) and sealant (if required)
Central Member Strain-Relief Bracket
Splice Tray Mounting Location
Sheath Retention Bracket
5.
Components
5.1 Components are illustrated in Figure 2.
The base plate is the dark metal plate that holds
the components inside the enclosure. It is
secured by four screws.
5.2 An installation kit is provided that
includes cable ties, central member strain-relief
hardware, a sheath retention kit and a quick-
release latch kit.
6.
Unpacking Stubbed Units
Stubbed unit unpacking instructions are
detailed in SRP 003-310. This instruction is
provided with stubbed hardware shipping
containers.
Radius Control Guides
Page 3
Fan-out
Bracket
Drop Cable
Strain-Relief
Bracket
Connector
Panel
Support
Brackets
Figure 2