Makita 5046D 기술 정보 - 페이지 4

{카테고리_이름} Makita 5046D에 대한 기술 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 5046D 7 페이지. Makita cordless circular saws with dust collection
Makita 5046D에 대해서도 마찬가지입니다: 사용 설명서 (12 페이지)

페이지 인쇄

epair

< 1 > Removing gear housing complete from base

Gear housing can be removed from base by loosening

pan hd. screw M5 and cap square bolt M6x90.

See Fig.1

(Note) Pay attention not to lose hex nut M5-8 when

removing gear housing.

Cap square bolt M6x90

< 2 > Removing and assembling safety cover

See Fig.2.

Safety cover side

The concave section has to

be faced to safety cover side

as per the above illustration.

1. Hex socket Hd.bolt M6x20

2. Outer flange 40

3. Tipped saw blade

4. Inner flange 40

5.Cup washer (Pay attention to the direction of cup washer)

6. Retaining ring S-38

(Spacer has to be inserted into the safety cover fully. Otherwise safety cover can not move.)

7. Spacer

8. Safety cover

9.Thickness ring (Thickness ring has to be installed between 10.spacer and 12.bearing box.)

(Spacer has to be inserted into the safety cover fully. Otherwise safety cover can not move.)

10. Spacer

11.Spindle

12.Bearing box

Pan hd. screw M5

Fig.1

Fig.2

Gear housing

Hex nut M5-8

Base