Makita 5046D 기술 정보 - 페이지 5

{카테고리_이름} Makita 5046D에 대한 기술 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 5046D 7 페이지. Makita cordless circular saws with dust collection
Makita 5046D에 대해서도 마찬가지입니다: 사용 설명서 (12 페이지)

페이지 인쇄
Makita 5046D 기술 정보
< 3 > The cut section of retaining ring 38 has to be located within the following compass.
Cut of retaining
ring S-38
The cut section of retaining ring 38
has to be located within this compass.
< 4 >
Removing spur gear 53
Remove two countersunk-head screws and take off bearing box from gear housing complete.
Then follow procedures:
1) remove bearing retainer (left screw),
2) hold bearing box,
3) press arbor from rear of spindle by using a rod, etc. and remove the spindle.
< 5 > Assembling lever 42
Lever 42 has to be so good adjusted and assembled that it can loosen or fasten for depth adjustment
with one action properly.
The instance of the area
in which the depth adjustment
can be done with one action
properly.
Retaining ring S-38
Arbor press cradle
40mm
Rod ø5.5mm or under
40mm