Makita 5091D 사용 설명서 - 페이지 7

{카테고리_이름} Makita 5091D에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 5091D 18 페이지. 85 mm (3-3/8")
Makita 5091D에 대해서도 마찬가지입니다: 부품 목록 (2 페이지)

페이지 인쇄
Makita 5091D 사용 설명서
NEVER place your hand or fingers
behind the saw. If kickback occurs,
the saw could easily jump backwards
over your hand, possibly causing
severe injury.
I
Fig.
3
IO.
Lower Guard. Raise lower guard with the retracting handle.
11.
Adjustments. Before cutting be sure depth and bevel adjustments are tight.
12. Use Only Correct Blades In Mounting. Don't use blades with incorrect size
holes. Never use defective or incorrect blade washers or bolts.
13. Avoid Cutting Nails. Inspect for and remove all nails from lumber before
cutting.
14. Operate with proper hand support
and proper workpiece support.
A
typical illustration of proper hand
support and workpiece support.
F i g .
WARN IN G
:
It
is important to support the workpiece properly and t o hold the saw firmly
to prevent loss of control which could cause personal injury. Fig. 4 illustrates
typical hand support
of
the saw.
7