Makita 5091D Kullanım Kılavuzu - Sayfa 7
Elektrikli Alet Makita 5091D için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Makita 5091D 18 sayfaları. 85 mm (3-3/8")
Ayrıca Makita 5091D için: Parça Listesi (2 sayfalar)
Sayfayı Yazdır
NEVER place your hand or fingers
behind the saw. If kickback occurs,
the saw could easily jump backwards
over your hand, possibly causing
severe injury.
I
Fig.
3
IO.
Lower Guard. Raise lower guard with the retracting handle.
11.
Adjustments. Before cutting be sure depth and bevel adjustments are tight.
12. Use Only Correct Blades In Mounting. Don't use blades with incorrect size
holes. Never use defective or incorrect blade washers or bolts.
13. Avoid Cutting Nails. Inspect for and remove all nails from lumber before
cutting.
14. Operate with proper hand support
and proper workpiece support.
A
typical illustration of proper hand
support and workpiece support.
F i g .
WARN IN G
:
It
is important to support the workpiece properly and t o hold the saw firmly
to prevent loss of control which could cause personal injury. Fig. 4 illustrates
typical hand support
of
the saw.
7