CORNING FBC-015 기술 지침 - 페이지 6

{카테고리_이름} CORNING FBC-015에 대한 기술 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. CORNING FBC-015 6 페이지.

페이지 인쇄

Problem: Error light flashes

Possible Cause:

1. Ferrule Adapter maybe dirty

2. The connector may be dirty

3. The photo detector is dirty

4. The connector is not loaded

correctly à

5. The ferrule adapter is not

properly secured in the adapter

port

6. Weak Batteries

C o r n i n g C a b l e S y s t e m s G m b H & C o . K G · L e i p z i g e r S t r . 1 2 1 · 1 0 1 1 7 B e r l i n , G e r ma n y

T E L : 0 0 8 0 0 - 2 6 7 6 - 4 6 4 1 ( 0 0 8 0 0 - C O R N I N G 1 ) · F A X : + 4 9 - 3 0 - 5 3 0 3 - 2 3 3 5 · E m a i l : e me a . c s @ c o r n i n g . c o m

w w w . c o r n i n g . c o m/ c a b l e s y s t e ms

Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems' products without prior notification. LANscape

is a registered trademark of Corning Cable Systems Brands, Inc. All other trademarks are the properties of their respective owners. Corning Cable Systems is ISO 9001 certified. ©

Solution:

1. Clean the Ferrule Adapter and connector. The adapter is

cleaned by the cleaning sticks provided in the tool. Insert

stick into the adapter opening and rotate the stick 10 times,

clockwise (apply varying pressures to create a pumping

action). Don' t reuse the stick.

2. Clean the end face of the connector.

3. Clean the photo detector with a dry wipe.

4. Remove connector dust caps. The date code on the SC and

LC should be facing up. The " UP" of the ST adapter should

be facing up. The crimp tube must protrude past the crimp

arms.

5. Make sure the proper ferrule adapter is being used and is

fully seated on the connector.

6. Replace batteries

Techni cal Instructi ons

Oc t ober 19, 2007

Photo

Detector