CORNING EDGE 설치 - 페이지 4
{카테고리_이름} CORNING EDGE에 대한 설치을 온라인으로 검색하거나 PDF를 다운로드하세요. CORNING EDGE 4 페이지. Single-module housing
CORNING EDGE에 대해서도 마찬가지입니다: 매뉴얼 (11 페이지)
페이지 인쇄3.3
EDGE™(empty) Module with Spliced Pigtail into SMH
1
Remove screws.
Lift cover o .
4
Remove cover from
empty module.
7
Replace module cover.
10
Corning Optical Communications LLC • 4200 Corning Place • Charlotte, NC 28216 USA
800-743-2675 • FAX: 828-325-5060 • International: +1-828-901-5000 • www.corning.com/opcomm
Corning Optical Communications reserves the right to improve, enhance, and modify the features and specifications of Corning Optical Communications products without
prior notification. A complete listing of the trademarks of Corning Optical Communications is available at www.corning.com/opcomm/trademarks. All other trademarks are the
properties of their respective owners. Corning Optical Communications is ISO 9001 certified. © 2011, 2016, 2020 Corning Optical Communications. All rights reserved.
2
Remove screws and remove
mounting bracket.
5
Install empty
module into SMH.
8
Replace housing cover
and tighten screws.
Install cover on
splice tray.
3
Attach slack storage/splice
housing attachment with
screws just removed.
6
Wrap pigtail bers in spiral
wrap; clean and mate
connectors and adapters.
11
Secure splice tray
with screw.
Standard Recommended Procedure 003-892-AEN | Issue 5 | November 2020 | Page 4 of 4
9
Splice pigtail to bers;
store in splice tray.
Cable tie
TPA-3863