CORNING EDGE 매뉴얼

{카테고리_이름} CORNING EDGE에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CORNING EDGE 11 페이지. Single-module housing
CORNING EDGE에 대해서도 마찬가지입니다: 설치 (4 페이지)

related literature |Search www.corning.com/opcomm. Click on "Resources."

003-794-AEN

003-888-AEN

003-276-AEN

003-991-AEN

003-892-AEN

003-1049-AEN

000-274-AEN

003-885-AEN

006-407-QSG-AEN

GENERAL

The fiber zone box (FZB) may be equipped with EDGE™ or EDGE8™ module trays. Installation of

modules is the same for either tray.

TOOLS AND MATERIALS

• Panel-lifter (suction cup for laminate panels or hook-and-loop for carpeted panels) for

accessing the raised floor.

• Screwdriver and other standard tools (pliers, etc.)

• Mounting hardware is not provided. The type of hardware used depends on the mounting

location; wall anchors may be required for adequate support on sheetrock walls.

GAINING ACCESS TO THE FIBER ZONE BOX (FZB)

3.1. To Open the Door

Step 1:

Unlock the door, then remove the key.

Step 2:

Pull the latch handle up and turn it one-quarter turn as shown in Figure 2.

EDGE™ Solution

EDGE Solution with 1U/2U/4U Fixed Trays

EDGE Secure Solutions FTTD Module

EDGE Port Replication Housing

EDGE and EDGE8® Solution Single Module Housing

EDGE Solution Single Module Housing for Splicing

EDGE Splice Cassette/EDGE Field-Terminated Cassette

EDGE Solution Modules in an Enhanced Management Frame

Field Tool for MTP® PRO Connectors Quick Start Guide

STANDARD RECOMMENDED PROCEDURE 003-825-AEN | ISSUE 7 | NOVEMBER 2020 | PAGE 1 OF 11

EDGE™ and EDGE8®Fiber

Zone Boxes

p/n 003-825-AEN, Issue 7

Figure 1