CORNING TPA-5831 매뉴얼 - 페이지 3

{카테고리_이름} CORNING TPA-5831에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CORNING TPA-5831 6 페이지. Rackless mounting kits

Rackless Wire Tray Mounting Kit 2U or 4U

X Axis

bracket

X Axis

TPA-5833

NOTE: This installation requires two people.

Step 1:

The first person places the mini-frame under the wire tray.

Step 2:

The second person aligns the X axis and Z axis brackets over the wire tray in line with the slots in the

mini-frame (Figure 2).

Step 3:

The first person slides the captive screws on the underside of the mini-frame under the X and Z axis

brackets and loosely inserts the screws into the threaded nuts on the brackets.

Step 4: Adjust the kit location in the X direction (left or right) and tighten the screws in the X axis brackets

from the underside of the mini-frame.

Step 5:

Adjust the kit location in the Z direction (forwards or backwards) so the housing will align with the

front of the cabinet below, if present. Consider the 4.5-in frontal projection in your calculations.

Tighten the screws on the Z brackets from the underside.

Z Axis

bracket

Z Axis

Standard Recommended Procedure 003-809 | Issue 7 | May 2017 | Page 3 of 6

Figure 2