Makita 6391D 기술 정보 - 페이지 4

{카테고리_이름} Makita 6391D에 대한 기술 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 6391D 7 페이지.
Makita 6391D에 대해서도 마찬가지입니다: 사용 설명서 (8 페이지)

epair

[3] DISASSEMBLY/ASSEMBLY

[3]-2. Gear Assembly, DC Motor

ASSEMBLING

The following portions of DC motor, Motor bracket and Gear ass'y have to face the same side. (Fig. 8)

* Red point mark (designated as plus terminal) on DC Motor

* None of protrusion side of Motor bracket

* Gear assembly's protrusion

Fig. 8

protrusion of Gear ass'y

Gear ass'y

Do not face the protrusion of

Motor bracket to the protrusion

of Gear ass'y and the red

point mark on DC motor.

[3]-3. Speed Change Lever

ASSEMBLING

(1) When assembling Speed change lever ass'y, make sure two Compression springs are assembled to its bottom

in advance. (Fig. 9)

(2) Fit the protrusion of Gear ass'y into Compression spring 4 in Speed change lever ass'y . (Fig. 10)

(3) After mounting, set Speed change lever ass'y to low speed mode or high speed mode. (Fig. 11)

Fig. 9

Speed change lever

ass'y

Fig. 11

1: Low speed mode

Speed change

lever ass'y

none of protrusion

side

DC motor

Fig. 10

Compression

spring 4 (2pcs.)

protrusion of Gear ass'y

2: High speed mode

Slide Speed change lever to either of

the direction designated in arrow, and hold

the position.

red point mark

on DC motor

Motor bracket

P 4/ 7