Makita 9207SPB 사용 설명서 - 페이지 6

{카테고리_이름} Makita 9207SPB에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 9207SPB 8 페이지. Polisher
Makita 9207SPB에 대해서도 마찬가지입니다: 사용 설명서 (17 페이지), 사용 설명서 (12 페이지), 사용 설명서 (8 페이지)

페이지 인쇄

ASSEMBLY

CAUTION:

Always be sure that the tool is switched off and

•

unplugged before carrying out any work on the

tool.

Installing side grip (auxiliary handle)

003445

CAUTION:

Always be sure that the side grip is installed

•

securely before operation.

Screw the side grip on the tool securely. The side grip

can be installed on either side of the tool, whichever is

convenient.

Installing or removing abrasive disc

003455

Mount the rubber pad onto the spindle. Fit the abrasive

disc on the rubber pad and screw the lock nut onto the

spindle.

To tighten the lock nut, hold the spindle with the wrench

so that it cannot revolve, then use the lock nut wrench

and securely tighten clockwise.

003456

1. Side grip

1. Lock nut

2. Abrasive disc

3. Rubber pad

1. Lock nut wrench

2. Wrench

To remove the disc, follow the installation procedure in

reverse.

Installing or removing the wool bonnet

003461

Mount the rubber pad onto the spindle. Screw the lock

nut onto the spindle.

To tighten the lock nut, hold the spindle with the wrench

so that it cannot revolve, then use the lock nut wrench

and securely tighten clockwise.

Fit the wool bonnet completely over the rubber pad and

pull the string tight. Tie a bow knot and tuck the knot and

any loose strings between the wool bonnet and the

rubber pad.

003462

To remove the wool bonnet, follow the installation

procedure in reverse.

OPERATION

Sanding operation

003471

CAUTION:

Always wear safety goggles or a face shield during

•

operation.

Never switch on the tool when it is in contact with

•

the workpiece, it may cause an injury to operator.

1. Wool bonnet

2. Lock nut

3. Rubber pad