Makita 9207SPB 사용 설명서 - 페이지 5

{카테고리_이름} Makita 9207SPB에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 9207SPB 8 페이지. Polisher
Makita 9207SPB에 대해서도 마찬가지입니다: 사용 설명서 (17 페이지), 사용 설명서 (12 페이지), 사용 설명서 (8 페이지)

페이지 인쇄

e) Do not attach a saw chain woodcarving blade

or toothed saw blade. Such blades create

frequent kickback and loss of control

Safety Warnings Specific for Sanding Operations:

17. Do not use excessively oversized sanding disc

paper.

recommendations, when selecting sanding

paper. Larger sanding paper extending beyond

the sanding pad presents a laceration hazard and

may cause snagging, tearing of the disc or

kickback.

Safety Warnings Specific for Polishing Operations:

a) Do not allow any loose portion of the

polishing bonnet or its attachment strings to

spin freely. Tuck away or trim any loose

attachment

strings.

attachment strings can entangle your fingers or

snag on the workpiece.

Additional Safety Warnings:

18. Check the backing pad carefully for cracks,

damage

Replace cracked, damaged or deformed pad

immediately.

19. Do not leave the tool running. Operate the tool

only when hand-held.

20. Always be sure that the tool is switched off

and unplugged or that the battery cartridge is

removed before carrying out any work on the

tool.

21. Do not touch the workpiece immediately after

operation; it may be extremely hot and could

burn your skin.

22. Check

that

supported.

23. If working place is extremely hot and humid, or

badly polluted by conductive dust, use a

short-circuit breaker (30 mA) to assure

operator safety.

24. Do not use the tool on any materials

containing asbestos.

25. Do not use water or grinding lubricant.

26. Ensure that ventilation openings are kept clear

when working in dusty conditions. If it should

become

necessary

disconnect the tool from the mains supply

( use non metallic objects ) and avoid

damaging internal parts.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to safety rules for the subject product. MISUSE or

manufacturers

Loose

and

deformity

before

the

workpiece

clear

dust,

failure to follow the safety rules stated in this

instruction manual may cause serious personal

injury.

FUNCTIONAL DESCRIPTION

CAUTION:

Always be sure that the tool is switched off and

•

unplugged before adjusting or checking function on

the tool.

Switch action

spinning

operation.

003433

CAUTION:

Before plugging in the tool, always check to see

•

that the switch trigger actuates properly and

returns to the "OFF" position when released.

To start the tool, simply pull the switch trigger. Release

the switch trigger to stop.

For continuous operation, pull the switch trigger and

then push in the lock button.

To stop the tool from the locked position, pull the switch

trigger fully, then release it.

properly

Speed change

first

003437

For sanding operations, use the high-speed setting "H"

for maximum performance.

For polishing and buffing operations, use the low-speed

setting "L" for suitable speed range.

CAUTION:

Use the speed change switch only after the tool

•

comes to a complete stop.

1. Switch trigger

2. Lock button

1. Speed change

switch