Makita 9207SPB Gebruiksaanwijzing - Pagina 5
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Makita 9207SPB. Makita 9207SPB 8 pagina's. Polisher
Ook voor Makita 9207SPB: Gebruiksaanwijzing (17 pagina's), Gebruiksaanwijzing (12 pagina's), Gebruiksaanwijzing (8 pagina's)
Pagina afdrukken
e) Do not attach a saw chain woodcarving blade
or toothed saw blade. Such blades create
frequent kickback and loss of control
Safety Warnings Specific for Sanding Operations:
17. Do not use excessively oversized sanding disc
paper.
recommendations, when selecting sanding
paper. Larger sanding paper extending beyond
the sanding pad presents a laceration hazard and
may cause snagging, tearing of the disc or
kickback.
Safety Warnings Specific for Polishing Operations:
a) Do not allow any loose portion of the
polishing bonnet or its attachment strings to
spin freely. Tuck away or trim any loose
attachment
strings.
attachment strings can entangle your fingers or
snag on the workpiece.
Additional Safety Warnings:
18. Check the backing pad carefully for cracks,
damage
or
Replace cracked, damaged or deformed pad
immediately.
19. Do not leave the tool running. Operate the tool
only when hand-held.
20. Always be sure that the tool is switched off
and unplugged or that the battery cartridge is
removed before carrying out any work on the
tool.
21. Do not touch the workpiece immediately after
operation; it may be extremely hot and could
burn your skin.
22. Check
that
supported.
23. If working place is extremely hot and humid, or
badly polluted by conductive dust, use a
short-circuit breaker (30 mA) to assure
operator safety.
24. Do not use the tool on any materials
containing asbestos.
25. Do not use water or grinding lubricant.
26. Ensure that ventilation openings are kept clear
when working in dusty conditions. If it should
become
necessary
disconnect the tool from the mains supply
( use non metallic objects ) and avoid
damaging internal parts.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
Follow
manufacturers
Loose
and
deformity
before
the
workpiece
is
to
clear
dust,
failure to follow the safety rules stated in this
instruction manual may cause serious personal
injury.
FUNCTIONAL DESCRIPTION
CAUTION:
Always be sure that the tool is switched off and
•
unplugged before adjusting or checking function on
the tool.
Switch action
spinning
operation.
003433
CAUTION:
Before plugging in the tool, always check to see
•
that the switch trigger actuates properly and
returns to the "OFF" position when released.
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
For continuous operation, pull the switch trigger and
then push in the lock button.
To stop the tool from the locked position, pull the switch
trigger fully, then release it.
properly
Speed change
1
first
003437
For sanding operations, use the high-speed setting "H"
for maximum performance.
For polishing and buffing operations, use the low-speed
setting "L" for suitable speed range.
CAUTION:
Use the speed change switch only after the tool
•
comes to a complete stop.
5
1. Switch trigger
2. Lock button
1
2
1. Speed change
switch