Avanti BCAD680 사용 설명서 - 페이지 11

{카테고리_이름} Avanti BCAD680에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avanti BCAD680 19 페이지. Avanti products beverage center instruction manual bcad680

When removing any of these shelves out of the rail compartment, you must first disassemble and

remove both of the plastic posts after removing the Phillips screws that holds each post in place.

NOTE:

All parts removed must be saved to do the replacement of the fluorescent light.

Before removing the fluorescent light, either turn off the appliance or disconnect the electricity

leading into the appliance at the main power supply. Failur e to do so could result in electrical

shock or personal injury.

Turn off the fluorescent light switch .

Pull down to remove the fluorescent light cover (3) softly.

Rotate the fluorescent light (2) 90° and pull down softly to remove it from the light holder (1).

Replace with a T-5 fluorescent light that is the same shape and size.

Replace the light cover (3).

1. Light Holder

2. Fluorescent Light T5 (8 W atts)

3. Light Cover

Unplug the appliance, and remove all items including shelves.

Wash the inside surfaces with a warm water and baking soda solution. The solution should be

about 2 tablespoons of baking soda to a quart of water.

See figure "AA"

CARE AND MAINTENANCE

FIG "AA"