Avanti BCAD680 Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Lodówka Avanti BCAD680. Avanti BCAD680 19 stron. Avanti products beverage center instruction manual bcad680

Drukuj stronę

When removing any of these shelves out of the rail compartment, you must first disassemble and

remove both of the plastic posts after removing the Phillips screws that holds each post in place.

? Replacing Your Fluorescent Light

NOTE:

All parts removed must be saved to do the replacement of the fluorescent light.

Before removing the fluorescent light, either turn off the appliance or disconnect the electricity

leading into the appliance at the main power supply. Failur e to do so could result in electrical

shock or personal injury.

Turn off the fluorescent light switch .

Pull down to remove the fluorescent light cover (3) softly.

Rotate the fluorescent light (2) 90° and pull down softly to remove it from the light holder (1).

Replace with a T-5 fluorescent light that is the same shape and size.

Replace the light cover (3).

1. Light Holder

2. Fluorescent Light T5 (8 W atts)

3. Light Cover

? Cleaning Your Beverage Center

Unplug the appliance, and remove all items including shelves.

Wash the inside surfaces with a warm water and baking soda solution. The solution should be

about 2 tablespoons of baking soda to a quart of water.

See figure "AA"

CARE AND MAINTENANCE

FIG "AA"