Fringer EF-NZ 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} Fringer EF-NZ에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fringer EF-NZ 4 페이지. Canon ef to nikon z mount adapter
Fringer EF-NZ에 대해서도 마찬가지입니다: 사용자 설명서 (6 페이지)

페이지 인쇄

lens focal length input function.

When the adapter is installed on the camera and no electronic lens is

Usage:

installed, turn on the camera and set it in photo shooting mode. (We use a 135mm

manual lens as a sample)

1) Half press and hold shutter button (or AF-ON button). Press AFL button (Center

of sub-selector by default) for 3 times. Release shutter button (or AF-ON button).

2) Now, there should be a F1.1 on the screen. It means we are now inputting the

first digit of the focal length number.

3) Press AFL button once. Now the F number displayed on the screen represents

the value currently stored. F10 means 0, F11 means 1, ..., F19 means 9.

4) Press AFL button for multiple times until current digit reaches the value you want.

Each time after it's pressed, current digit will increase by 1. For example, we need

to set it to 1 for a 135mm lens.

5) Half press shutter button (or AF-ON button) and release it. Now, there should

be a F2.2 on the screen. It means we are now inputting the second digit of the

focal length number.

6) Repeat step 3 to 4 to set the second digit. For example, we need to set it to 3

for a 135mm lens.

7) Half press shutter button (or AF-ON button) and release it. Now, there should

be a F3.3 on the screen. It means we are now inputting the third digit of the focal

length number.

8) Repeat step 3 to 4 to set the third digit. For example, we need to set it to 5 for

a 135mm lens.

9) Half press shutter button (or AF-ON button) and release it. Now, there should

be a F1 on the screen. It means the focal length number has been stored and

the camera has returned to photo shooting mode.

During the above process, you may cancel at anytime by turning of the camera.

In that case, the focal length value stored won't be changed.

After a new value is set, you may take a photo and check the focal length field in

the EXIF. The value is stored in the adapter permanently and won't be affected by

AF-ON button

AFL button

(by default)