Fringer EF-NZ Skrócona instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Akcesoria do kamer Fringer EF-NZ. Fringer EF-NZ 4 stron. Canon ef to nikon z mount adapter
Również dla Fringer EF-NZ: Podręcznik użytkownika (6 strony)
Drukuj stronę
lens focal length input function.
When the adapter is installed on the camera and no electronic lens is
Usage:
installed, turn on the camera and set it in photo shooting mode. (We use a 135mm
manual lens as a sample)
1) Half press and hold shutter button (or AF-ON button). Press AFL button (Center
of sub-selector by default) for 3 times. Release shutter button (or AF-ON button).
2) Now, there should be a F1.1 on the screen. It means we are now inputting the
first digit of the focal length number.
3) Press AFL button once. Now the F number displayed on the screen represents
the value currently stored. F10 means 0, F11 means 1, ..., F19 means 9.
4) Press AFL button for multiple times until current digit reaches the value you want.
Each time after it's pressed, current digit will increase by 1. For example, we need
to set it to 1 for a 135mm lens.
5) Half press shutter button (or AF-ON button) and release it. Now, there should
be a F2.2 on the screen. It means we are now inputting the second digit of the
focal length number.
6) Repeat step 3 to 4 to set the second digit. For example, we need to set it to 3
for a 135mm lens.
7) Half press shutter button (or AF-ON button) and release it. Now, there should
be a F3.3 on the screen. It means we are now inputting the third digit of the focal
length number.
8) Repeat step 3 to 4 to set the third digit. For example, we need to set it to 5 for
a 135mm lens.
9) Half press shutter button (or AF-ON button) and release it. Now, there should
be a F1 on the screen. It means the focal length number has been stored and
the camera has returned to photo shooting mode.
During the above process, you may cancel at anytime by turning of the camera.
In that case, the focal length value stored won't be changed.
After a new value is set, you may take a photo and check the focal length field in
the EXIF. The value is stored in the adapter permanently and won't be affected by
2
AF-ON button
AFL button
(by default)