Makita BJN160 기술 정보 - 페이지 4

{카테고리_이름} Makita BJN160에 대한 기술 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita BJN160 8 페이지. Cordless nibbler
Makita BJN160에 대해서도 마찬가지입니다: 사용 설명서 (13 페이지), 사용 설명서 (11 페이지), 사용 설명서 (13 페이지), 사용 설명서 (12 페이지)

페이지 인쇄

epair

[3] DISASSEMBLY/ASSEMBLY

[3] -1. Gear Housing Complete (cont.)

DISASSEMBLING

(3) Disassemble Spur gear 31 and Crank section as drawn in Fig. 4.

Fig. 4

1. Separate Ram by removing Pin 6, and then

remove Spur gear 31 together with Crank

shaft from Rod.

Ram

Pin 6

ASSEMBLING

(1) Assemble Spur gear 31 and Crank section as drawn in Fig. 5.

Fig. 5

1. Set Woodruff key 3 to Crank shaft.

And then, insert the slim end of

Crank shaft into Spur gear 31

from its stepped side while fitting

Woodruff key 3 to the groove of

Spur gear 31.

stepped side

slim end

Woodruff key 3

(2) Assemble Spur gear 31, Crank section and the other component parts to Gear housing complete by reversing

the disassembly procedure. (Refer to Fig. 3)

Note: Do not forget to mount Flat washer 6 to Gear complete 16-36. (Refer to the center drawn in Fig. 3)

Crank shaft

Rod

Spur gear 31

2. Put Super gear 31 and Crank

section onto 1R032.

Then, Press the Gear down

with 1R030 until it stops.

groove

Spur gear 31

Crank shaft

2. Place Super gear 31 and Crank shaft on 1R217.

Then, press Crank shaft down with 1R282.

Note: Be careful not to lose Woodruff key 3.

1R282

Crank shaft

1R217

Spur gear 31

3. Insert Crank shaft into Rod, and

assemble Ram to the other end

of Rod with Pin 6.

Note: Do not forget to mount

Crank shaft

Rod

1R030

Spur gear 31

Crank shaft

1R032

P 4/ 8

Crank shaft

Woodruff key 3

Flat washer 8.

Flat washer 8

Ram

Pin 6