Makita BJN160 기술 정보 - 페이지 3
{카테고리_이름} Makita BJN160에 대한 기술 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita BJN160 8 페이지. Cordless nibbler
Makita BJN160에 대해서도 마찬가지입니다: 사용 설명서 (13 페이지), 사용 설명서 (11 페이지), 사용 설명서 (13 페이지), 사용 설명서 (12 페이지)
페이지 인쇄
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Gear Housing Complete (cont.)
DISASSEMBLING
(2) Disassemble the component parts from Gear housing complete as drawn in Fig. 3.
Fig. 3
1. Remove Stopper by unscrewing
Bind CT4x12 Tapping screw.
Bind CT4x12 Tapping
screw
4. Remove Punch holder together
with Punch from Ram.
Ram
Punch holder
Punch
7. Remove Super gear 31 together with Crank section
while turning them 90°.
Note: Be careful not to lose Flat washer 8.
2. Pull off Die holder section from
Gear housing complete.
Stopper
Die holder
section
5. Remove Gear complete 16-36
from Gear housing complete.
Note: Be careful not to lose
Flat washer 6.
Gear complete 16-36
Flat washer 6
Flat washer 8
Gear housing
complete
3. Set Punch to the lowest position
by turning Gear complete 16-36.
Gear complete
16-36
Punch
6. Lift up Spur gear 31 until the
space for twisting Spur gear 31
and Crank shaft is reserved.
Spur gear 31
P 3/ 8