Makita BJN160 Teknik Bilgiler - Sayfa 3
Elektrikli Alet Makita BJN160 için çevrimiçi göz atın veya pdf Teknik Bilgiler indirin. Makita BJN160 8 sayfaları. Cordless nibbler
Ayrıca Makita BJN160 için: Kullanım Kılavuzu (13 sayfalar), Kullanım Kılavuzu (11 sayfalar), Kullanım Kılavuzu (13 sayfalar), Kullanım Kılavuzu (12 sayfalar)
Sayfayı Yazdır
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Gear Housing Complete (cont.)
DISASSEMBLING
(2) Disassemble the component parts from Gear housing complete as drawn in Fig. 3.
Fig. 3
1. Remove Stopper by unscrewing
Bind CT4x12 Tapping screw.
Bind CT4x12 Tapping
screw
4. Remove Punch holder together
with Punch from Ram.
Ram
Punch holder
Punch
7. Remove Super gear 31 together with Crank section
while turning them 90°.
Note: Be careful not to lose Flat washer 8.
2. Pull off Die holder section from
Gear housing complete.
Stopper
Die holder
section
5. Remove Gear complete 16-36
from Gear housing complete.
Note: Be careful not to lose
Flat washer 6.
Gear complete 16-36
Flat washer 6
Flat washer 8
Gear housing
complete
3. Set Punch to the lowest position
by turning Gear complete 16-36.
Gear complete
16-36
Punch
6. Lift up Spur gear 31 until the
space for twisting Spur gear 31
and Crank shaft is reserved.
Spur gear 31
P 3/ 8