Avanti OCR2519SS 사용 설명서 - 페이지 10
{카테고리_이름} Avanti OCR2519SS에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avanti OCR2519SS 20 페이지. Outdoor beverage cooler
OPERATING YOUR BEVERAGE COOLER
Do not store food in Beverage Center, as interior temperature may not get cool enough to prevent
spoilage.
As a natural result of condensation, in summer months or areas of high humidity, the glass door
may build up moisture on the outside. Just wipe it away.
If the ambient temperature is above or below recommended temperatures, the performance of the
unit may be affected. For example, placing your unit in extreme cold (under 45ºF) or hot conditions
(over 110ºF) may cause interior temperatures to fluctuate. The range of 34º-43ºF (1º-6ºC) may not be
reached.
Your Beverage Cooler is designed to operate with at a range of 34º - 43º F (1 – 6ºC).
You can select temperature display setting from Fahrenheit to Celsius degree by pushing the ºF/ºC
button/mark. Fahrenheit or Celsius degrees indicator will appear in blue color in the temperature
display window.
ON/OFF POWER
To turn ON or OFF the appliance, press the
SETTING THE TEMPERATURE CONTROL
You can press UP
and DOWN
The degrees indicators will appear in the display window.
The temperature that you desire to set will increase 1ºF or 1ºC if you push the UP
button/mark once, on the contrary the temperature will decrease 1ºF or 1ºC if you push the
DOWN
button/mark once.
NOTE:
If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting
the unit. If you attempt to restart before this time delay, the Beverage Cooler will not start.
When you use the Beverage Cooler for the first time or restart the Beverage Cooler after having
been shut off for a long time, there could be a few degrees variance between the temperature you
select and the one indicated on the LED readout. This is normal and it is due to the length of the
activation time. Once the Beverage Cooler is running for a few hours everything will be back to
normal.
Do not remove storage baskets otherwise cans or bottles may stick to the inner surface or
develop excessive frost.
IMPORTANT SAFEGUARDS
button/mark .
buttons/marks to control the internal temperature .
10