Avanti OCR2519SS 사용 설명서 - 페이지 8

{카테고리_이름} Avanti OCR2519SS에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avanti OCR2519SS 20 페이지. Outdoor beverage cooler

 BEFORE USING YOUR BEVERAGE COOLER



Remove the exterior and interior packing.



Check to be sure you have all of the following parts:

Instruction Manual

Beverage Baskets

Keys

Casters with Brakes

Casters without Brakes

Hanging Basket

Handle Assembly with Screws (6)

Protective Cover

Bottle opener with screws (2)

Allen Wrench



Before connecting this appliance to the power source, let it stand upright for approximately 2

hours. This will reduce the possibility of a malfunction in the cooling system from handling

during transportation.



Clean the interior surface with lukewarm water using a soft cloth.

 INSTALLATION OF YOUR BEVERAGE COOLER



This appliance is designed to be for free standing installation.

Place your Beverage Cooler on a floor that is strong enough to support it when it is fully

loaded.



Your Beverage Cooler is designed to either be moveable using the casters (included).

 Install the casters (included) as shown in this manual on page 9.



Locate the Beverage Cooler away from sources of heat (stove, heater, radiator, etc.). Direct

sunlight may affect the acrylic coating and heat sources may increase electrical consumption.

Extreme cold ambient temperatures may also cause the unit not to perform properly.



Avoid locating the unit in moist areas.



Plug the Beverage Cooler into an exclusive, properly installed-grounded wall outlet. Do not

under any circumstances cut or remove the third (ground) prong from the power cord. Any

questions concerning power and/or grounding should be directed toward a certified electrician

or an authorized Avanti Products service center.



Collapsible Table:

1) To lift it up, grab side and push upwards.

2) To bring down table, lift top slightly and push latch up as shown on sketch until it releases.

INSTALLATION INSTRUCTIONS