BEROTEC Mofessor 매뉴얼 - 페이지 10

{카테고리_이름} BEROTEC Mofessor에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. BEROTEC Mofessor 16 페이지. Automatic chain lubrication system
BEROTEC Mofessor에 대해서도 마찬가지입니다: 매뉴얼 (16 페이지), 사용자 설명서 (12 페이지)

페이지 인쇄

4.4

Oil Tank and Dispensing Valve

The oil tank must be installed with the hose connection at the lowest

point. The golden ventilation of the tank must be at the highest point,

so that no oil can escape during driving.

To refill the system, a t-connector is placed between oil tank and

dispensing valve. The end cap, located at the end of the filler pipe,

needs to be attached. The removable end cap should be placed in an

accessible area, so refilling can be done easily. The oil flow direction

is marked with an arrow on the dispensing valve.

4.5

Electrics

The

MOFESSOR

connect/disconnect the plugs in energized condition.

The following steps are necessary for the electrical installation:



Chose installation place for the control unit



Connect dispensing valve to the control unit



Place switch for rain-mode activation on the motorbike

(Recommendation: handlebar / field of view, use switch

holder) and connect the switch to the control unit

 Avoid placing the cable of the switch close to the ignition

BEROTEC GmbH

Manual

Figure 2: Dimensions of the Oil Tank

is delivered completely wired and tested. Don't

MOFESSOR

P a g e

| 9